A&D FZ-300CT, Instruction Manual

Page: 50 / 80

48
9-15 Clock and Calendar Function
(Only for the FZ-CT/FZ-GD series)
The FZ-CT/FZ-GD series balances is equipped with a clock and calendar function. The
FX-CT/FX-GD series does not have this function. When the “GLP output (
info )” parameter is set to
“ 1 ” or “ 2 ” and the “Time/Date output ( 5-td )” parameter is set to “ 1 ”, “ 2 ” or “ 3 ”, the time and date are
added to the output data. Set or confirm the time and date as follows:
Operation
1 Press and hold the SAMPLE key until ba5fnc of
the function table is displayed.
2 Press the SAMPLE key several times to display
Cl adj .
3 Press the PRINT key. The balance enters the mode to
confirm or set the time and date.
Confirming the date
4 The current date is displayed with all the digits
blinking.
When the date is correct and the operation is to be
finished, press the CAL key and proceed to step 8.
When the time is to be confirmed, press the
SAMPLE key and proceed to step 6.
When the date is not correct and is to be changed,
press the RE-ZERO key and proceed to step 5.
Note
The year is expressed using a two-digit format. For
example, the year 2000 is expressed as “00”.
Setting the date (with part of the digits blinking)
5 Set the date using the following keys.
SAMPLE key To select the digits to change
the value. The selected digits
blink.
RE-ZERO key To increase the value by one.
MODE key To decrease the value by one.
PRINT key To store the new setting,
display
end
and go to step
6.
CAL key To cancel the new setting and
go to step 6.
Confirm
Goes to the
time setting
mode
Goes to the time
setting mode