172
Wired LAN specifications
Connector
RJ45
Protocol
TCP/IP
Display unit
Wired LAN terminal
To use the wired LAN terminal, you must select the setting value in the [Wired LAN] screen.
Refer to “
Settings in a red box are default values (factory settings).
Display settings: MENU key
System settings button
Communication button
Wired LAN button
[Wired LAN] screen
Name
Setting value (setting range)
IP address
For setting values, contact your LAN administrator.
Subnet mask
Default gateway
Data format
A&D standard format , DP format,
KF format,
MT format,
NU format,
NU2 format,
CSV format
For details on the data format, refer to “
Cautions on the wired LAN
For information about the connection to your local area network (LAN), contact your system
administrator.
To connect to a PC directly, use a cross cable.
To connect via a hub, use a straight cable.
Data can be collected by using Windows data communication software "WinCT-Plus".
For details on "WinCT-Plus", refer to "
".
Summary of Contents for BA-T Series
