A&D AD-4971, Instruction Manual

Page: 64 / 84

8
Modbus Communication
- 8.4
Address for Modbus
62
40100 FAIL limit Q 0.1 to 99.9 40116
Sensitivity adjustment,
Default belt speed
10.0 to 60.0
40101 FAIL limit P 0.1 to 99.9 40117
Sensitivity adjustment,
Default product length
1 to 1000
40102
FAIL limit P
shortage (deoxidant)
0.1 to 99.9 40118
Sensitivity adjustment,
Reset counter
0 to 1
40103 Under limit 0.1 to 99.9 40119 Count mode 0 to 1
40104 Phase I 0.5 to 180.0 40120 FAIL count mode 0 to 7
40105 Phase Q
0.5 to 180.0
40121 Belt stop at FAIL 0 to 1
40106 Phase P
0.5 to 180.0
40122 Distance to stop 1 to1000
40107
Phase tracking
ON/OFF
0 to 1
40123
Delay time of detection 㻌
0.00 to 9.99
40108
Phase tracking reset
ON/OFF 0 to 1
40124
Init. phase mode 㻌
0 to 2
40109 Calibration, PASS count 0 to 10 40125
Number of init. phase
㻌
1 to 10
40110 Calibration, FAIL count 0 to 10 40126 Number of phase adjustment
㻌
1 to 10
40111 Calibration error 0 to 1 40127 Rejector error
㻌
0 to 1
40112 FAIL 1 ON/OFF 0 to 1
40113 FAIL 2 ON/OFF 0 to 1
40114 FAIL 3 ON/OFF 0 to 1
40115 FAIL 4 ON/OFF 0 to 1
CCAUTION
The register ignores the decimal point of data and stores data.
Example: If data is between 0.0 and 99.99, a value between 0 and 9999 is inputted and
stored in the register.