A&D AD-4971 Instruction Manual Download Page 14

Page: 14 / 84

Basic Operations

- 4.2

Turning the Power ON and OFF

44.2.

Turning the Power ON and OFF

WARNING

Ground the AD-4971 and peripheral devices. If they are not grounded, they may cause

an electric shock, fire or malfunction.

4.2.1.

Turning the Power ON

The power switch is located on the front of the I/O box.
Rotate the power switch 90 degrees clockwise to turn on the
AD-4971.

Fig. 110 TTurning on

4.2.2.

Turning the Power OFF

The power switch is located on the front of the I/O box.
Rotate the power switch 90 degrees counterclockwise to turn
off the AD-4971.

Fig. 111 TTurning off

Cautions

The same operation is performed for an emergency stop.
When an emergency stop has been performed, turn on the AD-4971 again only after the issue

which necessitated the stop has been resolved.

When emergency or failure occurs, shut off the power immediately.

Summary of Contents for AD-4971





















































































Search results

Summary of Contents for AD-4971

Reviews:

Related manuals for AD-4971

Brands by name

Popular brands

A&D AD-4971, Instruction Manual

Search results

Summary of Contents for AD-4971

Reviews:

Related manuals for AD-4971

Brands by name

Popular brands