Operators and Maintenance Manual
Display
EEM MOT 01 FE01.07
Page
3/16
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
Introduction
This instrument is intended for ultralight, microlight, homebuilt and
experimental aircraft. The purpose of EEM MOT 01 type display is to
present key engine status information to the pilot. Version FE01.07
displays engine speed, cylinder heads temperature and exhaust gases
temperatures.
The device is equipped with an in-built colour display protected by anti-
reflective coated glass. The encoder knob & push-button located in the
front provides user interaction with the device. The electric connector,
hardware and software identification plates are located in the back of the
casing (Fig. 1)
Fig. 1. EEM MOT 01 Display
This instrument is not certified by the FAA and EASA. Fitting of this
instrument to certified aircraft is subject to the rules and conditions
pertaining to such in your country. Please check with your local aviation
authorities if in doubt.
1. General information
This manual contains binding information, guidelines and warnings for safe
handling and maintenance of this particular instrument before installation,
