Now that the wheels are timed and in place, tighten the 3
hold screws on the brush housing securely. (Figure 9)
Fill the machine with the product. Close the lid and lock it.
Your machine is now ready to vend.
The lid is hinged for convenience in servicing the unit. The
lid is not intended to be used as a shelf while servicing.
Weight on the open lid could cause damage to the unit.
14
Triple Crown Assembly
(Figure 9)
NOTE:
To remove the lid, open and slide to the left when looking
at the front of the unit. To replace the lid, align the pin in
the lid with the hinge on the case and slide to the right.
Secure the Brush Housings with Hold Screws
