Button Re-assignment
Procedure
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Rev: V1
Date: 041619
Page 1
SWI-RC-1
Steering Wheel Control Interface
Please read each of the following steps to familiarize yourself with the process before beginning. The
buttons must be programmed in the specific order shown in the chart below.
1. Turn the key to the ignition position. The LED will illuminate red.
2. Press and hold the programming button on the side of the interface until the LED illuminates green.
Release the programming button.
3. Within 7 seconds, press the button that is to be learned on the steering wheel. The LED will turn red
when the steering wheel button is pressed. At this point you have two options:
a. For short press functionality:
Release the button on the steering wheel. The LED will
change back to green.
b. For long press functionality:
Continue to hold the button until the LED flashes between red
and amber. Release the button and the LED will change back to green.
4. Repeat step 3 for each additional button on the steering wheel.
5. If you come across a function in the chart that your steering wheel does not have, or you do not want
to program, press and release the program button on the side of the interface to skip that function. The
LED will turn off and back on when the skip has been done successfully.
6.
Once programming is completed, wait seven seconds. The LED will flash green 3 times indicating the
end of programming.
7. Test the interface for proper functionality. Whenever a SWC button is pressed the LED on the interface
should blink green. If any function does not work, repeat the programming steps.
The SWC can always be restored to default settings by pressing and holding the programming button on
the side of the interface until the LED illuminates green. Release the programming button, then wait 7
seconds for the LED to flash 3 times.
Alpine
JVC
Kenwood /
Lightning Audio
Clarion /
Nakamichi
2-Wire
Resistive
Pioneer
Other *
Sony
Fusion
1
2
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
3
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
4
Source
Source
Source
Source
5
Preset -
Track +
Play
Preset -
Preset -
Preset -
Track +
6
Source
Track -
Track +
Search -
Source
Source
Source / End Call
Track -
7
Track +
Band / Disc +
Track -
Band
Track +
Track +
Track +
Audio
8
Track -
Preset / Disc -
Disc / FM +
Send / End
Track -
Track -
Track -
Power
9
Power
Select
Disc / AM -
Send
Band
Band
Band
10
Enter / Play
Attenuation
Answer
End
Phone Menu Answer **
Power / End Call
11
Band / Program Phone Receive
Voice Dial
VR
Answer Call
End **
Voice Dial / Answer / End Call
12
Receive
Phone Reject
On Hook
End Call
PTT **
VR (Android Auto & Car Play)
Answer / End Call***
13
End
Voice Dial
Off Hook
VR
14
VR
Power
Mute
15
No specific
programming
order. Please
refer to the
owners manual
of your particular
radio for
programming
instructions..
* Advent, Boyo, Dual, Lightning Audio, Jensen, Rockford Fosgate & Visteon ** Jensen & Advent ONLY ***
XAV-AX100 Only
Please Note: On any entry with multiple commands, the commands shown are source dependent.
