8
ArrestAll
© 2015 American Air Filter Company, Inc. Any use of the text or images
this document contains, without permission of American Air Filter
Company, Inc., is prohibited. ArrestAll, AAF, REDClean, REDFiltration,
and Reliable Efficient Durable are registered trademarks of American Air
Filter Company, Inc. d/b/a AAF International.
2.4
Electrical hazards
Before doing any work on the AAF equipment make sure that all potential
electrical hazards have been identified and that all electric current connected to
the equipment, and to any connected or associated equipment, has been properly
disconnected and securely locked-out to prevent accidental reconnection prior to
completion of the work. All electrical work shall be done in full accordance with the
current edition of NFPA 70, the National Electrical Code, and all other applicable
laws, rules, and regulations. All electrical work shall be performed by a licensed
electrician. Only original AAF parts shall be used as replacements for ongoing
maintenance and repair.
2.5
Rotating equipment
The ArrestAll can include a fan which is installed on the top of the dust
collector, either on top of the collector or as an integral fan. The fan wheel rotates
at a nominal speed of 3,600 rpm and has the potential to cause severe injury. The
fan wheel could be accessed from inside the cabinet through the air inlet and from
outside the cabinet through the fan discharge. All due care should be exercised to
avoid any contact with the operating fan. Under no circumstances should the fan
ever be allowed to operate when any of the access panels on the dust collector, or
the silencer, have been removed. The fan must be disconnected and locked out
prior to the performance of any maintenance work, see paragraph 2.4.
2.6
Safety guards
The dust collector cabinet prevents access to the fan inlet. All access panels
shall remain bolted in place while the fan is operating. Prior to the removal of any
access panels, the electrical power to the collector shall be disconnected and
locked out, see paragraphs 2.4 and 2.5. After electrical power is disconnected, the
fan wheel will continue to rotate for a period of time before coasting to a stop. Do
not access the fan until the fan wheel has come to a complete stop.
3
GENERAL PRODUCT INFORMATION
3.1
Description
The ArrestAll self-contained dust collector is a compact and efficient unit
designed to control intermittent, low to medium volume, dry, dust sources. It is
cleaned off-line, meaning that it cleans once the fan is turn off. The unit includes
an air mover and can be relocated as required.
Each collector is furnished with fan assembly, housing, filter cartridge(s),
and an automatic shaker mechanism for filter cleaning. Based on size, they are
