manualshive.com logo in svg

Aaeon SBC-598, Manual

Share
Download
Aaeon SBC-598 Manual Download Page 70

6 2

SBC-598 User Manual

Windows 95

Windows 95 (Display Driver Installation)

1. Click on the "Start" button and select "Control Panel" from the

Settings menu.

2. Double-click on the Display icon.

3. Select the Settings tab in the Display Properties window.

4. Click on the "Change Display Type" or the "Advanced Properties"

button.

5. Click on "Change..." in the Adapter tab.

6. Click on "Have Disk..."

7. Place the Windows 95 Installation Disk into the floppy drive.

8. When the Install from Disk dialog box appears, type the directory

storing the drivers  and click "OK" or click the "Browse..." button
to manually locate the drivers.

The directory is "A:\Win95\" and the file is called "SiS5597.INF"

9. The name of the VGA driver (SiS 5597/5598) will appear in the

Models list box of the Select Device dialog.

System Requirements

This section describes system requirements for the SiS 5598 VGA
Driver and how to install the drivers.

1. The hardware system must contain a 5598 chipset.

2. A mouse is optional.

3. Set the VGA Shared Memory Size in the BIOS CHIPSET Features

Setup.  Please refer to Chapter 3 for more information on how to
set the VGA Shared Memory Size in the BIOS CHIPSET FEA-
TURES SETUP section.

Summary of Contents for SBC-598

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands