Aaeon SBC-456, Manual, Page: 61 / 94

Chapter 3 AMIBIOS Setup 53
Peripheral setup
Peripheral Setup options are displayed by choosing the Peripheral
Setup icon from the AMIBIOS Setup main menu. All Peripheral
Setup options are described in this section:
AMIBIOS SETUP — BIOS SETUP UTILITIES
(C) 1995 American Megatrends, Inc. All Rights Reserved
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Power Management Setup
PCI/Plug and Play Setup
Peripheral Setup
Change Supervisor Password
Auto Configuration with Optimal Settings
Auto Configuration with Fail Safe Settings
Save Settings and Exit
Exit Without Saving
Standard CMOS setup for changing time, date, hard disk type, etc.
ESC: Exit :Sel F2/F3: Color F10: Save & Exit
¯-
ESC: Exit :Sel
PgUp/PgDn: Modify
F2/F3: Color
AMIBIOS SETUP — PERIPHERAL SETUP
(C) 1995 American Megatrends, Inc. All Rights Reserved
Onboard FDC :Auto
Onboard Serial Port1 :Auto
Onboard Serial Port2 :Auto
Onboard Parallel Port :Auto
Parallel Port Mode :Normal
Parallel Port IRQ :Auto
Parallel Port DMA Channel :N/A
Onboard SID1 PCI IDE :Enabled
Available Options:
Auto
Disabled
Enabled
¯-
Onboard FDC
This option enables the floppy drive controller on the mother-
board. The settings are Auto, Enabled, or Disabled.
Onboard Serial Port 1
This option enables serial port 1 on the motherboard and
specifies the base I/O port address for serial port 1.
The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h, and 2F8h.
The Fail-Safe default setting is Auto.