Aaeon SBC-456, Manual, Page: 37 / 94

Chapter 2 Installation 29
LCD driving voltage setting (JP2)
You can select the LCD connector (CN2) driving voltage by setting
JP2. The configuration is as follows:
LCD driving voltage setting(JP2)
3.3 V 5 V(default)
DOC address setting (JP3)
The DiskOnChip 2000 occupies a 8 KB window in the upper
memory address range of C800 to E000. You should ensure this
does not conflict with any other device's memory address. JP3
controls the memory address of the Flash disk.
DOC address setting (JP3)
Address CC00 D000
D400 D800 DC00
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6
1 3 5
2 4 6