Chapter 3 AMIBIOS setup
33
BootUp Sequence
This option sets the sequence of boot drives (floppy drive A:, hard
disk drive C:, or a CD-ROM drive) that the AMIBIOS attempts to
boot from after AMIBIOS POST completes. The settings are
C:,A:,CDROM
CDROM,A:,C:
A:,C:, CDROM.
BootUp Num-Lock
Set this option to Off to turn the Num Lock key off when the
computer is booted. When it is off, you can use the arrow keys on
both the numeric keypad and the keyboard. The settings are On or
Off.
Floppy Drive Swap
Set this option to Enabled to permit drives A: and B: to be
swapped. The settings are Enabled or Disabled.
Floppy Drive Seek
Set this option to Enabled to specify that floppy drive A: will
perform a seek operation at system boot. The settings are Disabled
or Enabled.
System Keyboard
This option specifies that a keyboard is attached to the computer.
The settings are Present or Absent.
Primary Display
This option specifies the type of display monitor and adapter in the
computer. The settings are Mono, CGA40x25, CGA80x25, VGA/
EGA, or Absent.
Password Check
This option enables password checking every time the computer is
powered on or every time AMIBIOS Setup is executed. If Always is
chosen, a user password prompt appears every time the computer
is turned on. If Setup is chosen, the password prompt appears if
AMIBIOS is executed.
StockCheck.com