manualshive.com logo in svg

Aaeon PFM-540I, User Manual

The Aaeon PFM-540I is a cutting-edge product that excels in versatility and performance. With its advanced features, this compact board is perfect for various applications. And guess what? You can easily access its comprehensive User Manual by simply visiting our website and downloading it for free!

Share
Download
background image

P C   1 0 4   C P U   M o d u l e  

P F M - 5 4 0 I

 

 

 

 
 
 

PFM-540I 

                                          AMD

®  

Geode   

LX  800  Processor 

AMD  LX  800  +CS  5536 

  RTL8139DL  for  10/100Mbps 

18/24-bit  TFT  LCD  Panel 

2  COM,  4  USB,  1  IrDA 

                                                             

                                                                 

 

 

 

 

 

 

 

 

 

 

 

 

PFM-540I  Manual  Rev.A  2nd  Ed. 

June 25, 2014 

Summary of Contents for PFM-540I






























































Reviews:

No comments

Related manuals for PFM-540I

Haier YR-H71 Service Manual preview
YR-H71
Brand: Haier Pages: 58
TA Hydronics STS Technical Description preview
STS
Brand: TA Hydronics Pages: 14
Danfoss VLT AutomationDrive FC 302 Installation Manual preview
VLT AutomationDrive FC 302
Brand: Danfoss Pages: 128
Danfoss VLT DriveMotor FCP 106 Installation Instructions preview
VLT DriveMotor FCP 106
Brand: Danfoss Pages: 4
Samson 327 Translation Of The Original Operating Instruction preview
327
Brand: Samson Pages: 73
IBM 5394 Manual preview
5394
Brand: IBM Pages: 38
RAKwireless RAK3172 User Manual preview
RAK3172
Brand: RAKwireless Pages: 6
Sakura Seiki Tissue-Tek TEC 6 Operating Manual preview
Tissue-Tek TEC 6
Brand: Sakura Seiki Pages: 6
Aurora AU-A1ZBSCD Manual preview
AU-A1ZBSCD
Brand: Aurora Pages: 2
Baier 50VA Instruction Manual preview
50VA
Brand: Baier Pages: 20
Cypress CY3280-BK1 Quick Start Manual preview
CY3280-BK1
Brand: Cypress Pages: 3
INSBUD IB-TRON 4000 SOL Instruction Manual preview
IB-TRON 4000 SOL
Brand: INSBUD Pages: 14
Conel CLEAR BOX Operating Instructions Manual preview
CLEAR BOX
Brand: Conel Pages: 52
Revox SRC-2000 Operating Instructions Manual preview
SRC-2000
Brand: Revox Pages: 57
Wittenstein TPM dynamic Operating Manual preview
TPM dynamic
Brand: Wittenstein Pages: 52
Watt Stopper MRDS10 Installation Instructions preview
MRDS10
Brand: Watt Stopper Pages: 3
Garz & Fricke SANTOKA 12.1 BX PCT Product Manual preview
SANTOKA 12.1 BX PCT
Brand: Garz & Fricke Pages: 37
Webasto Thermo Call TC3 Installation Instructions Manual preview
Thermo Call TC3
Brand: Webasto Pages: 15

Brands by name

Popular brands

Load more brands