9. Mount USB cables, Ethernet, KB and mouse connectors to I/O panel. Take the floppy drive bay and flip it 180 degrees from its
normal orientation, so the bottom is against the side wall of the M15. Mount the SSHD into the floppy drive bay. Place the I/O panel
where the plastic went for the floppy drive door, then place the floppy drive bay against the I/O panel and secure from the back with 6-
32 screws. (see picture 2)
Picture 2: This is how the I/O panel and floppy drive bay w/ SSHD should be mounted.
10. Re-connect the PLC/drive lid to the M15, and then plug in a keyboard and power up the console. Install your Linux configuration or
refer to TB167 to convert your DOS CNC7 files to Linux CNC10 files.
11. Once the configuration and program files are loaded onto the system re-install the M15 control onto the machine and test it out.
