7. Connect ATX power connector into MB and LCD cable into the LCD, and then connect the ATX PS to the 80mm fan, the console
fan/digitizer power cable, and the inverter/drive power cable. Power up the MB and verify it powers on. If that looks ok, install the
CPU7P3 card into the PC104 socket and connect the IDE cable to the SSHD. Now power on and verify the system boots into the
software. (see picture 2)
Picture 2: Shows the MB and ATX PS mounted in the M15.
8. If the console boots up into the software, shut it down. Then connect the ribbon cable extenders to the CPU7, the jog panel cable to
the CPU7 and install standoffs and metal cover over the CPU7. Using the metal spacers and 6-32x1/2? screws used to secure the
descrambler board, secure the metal bracket provided with the kit that has the same shape as a descrambler board.
