Picture 4: Proper routing of cables for M15 installation
Notes:
1. Be very careful with the routing of the cables. The pictures above show our recommended cable routing.
2. You must ensure the CPU7 board is pressed fully down into the socket on the motherboard; failure to do so
will cause a 64180 Timeout not responding error message when loading CNC7.
3. Ensure the LCD descrambler card and cable are correctly inserted.
4. Check the clearance between the Motherboard and the CPU7. Ensure none of the cables are pinched by
the CPU7. You may need to trim the ATX power connector to allow the wires to fold down either side as
shown in the picture above.
5. The current LCD descrambler for the Aaeon motherboards will ONLY work with a NEC 10.4"Color screen. If
your M15 has a 9.4" color or monochrome then it will not function.
