Picture 2: Aaeon motherboard installed in an M15
13. Re-install the CPU7; you may need to use 1/16" spacer on the top and bottom of each standoff. Ensure
that the CPU7 is inserted all the way into the socket. Also be sure that the CPU7 will line up correctly with the
back panel. (See Picture 3)
Picture 3: Completed installation of Aaeon motherboard with CPU7
15. After powering on the M15, you may need to go into the CMOS setup to change the LCD screen
resolution. To do this, hit the DEL key on the keyboard when the control does the Memory check. Go into
STANDARD CMOS SETUP. Change the PANEL type to 640x480 18 Bit for NEC 10.4" LCD screens or
640x480 12 bit for the 9.4" LCD screens.
