manualshive.com logo in svg

Aaeon PCM-4896, User Manual

Share
Download
Aaeon PCM-4896 User Manual Download Page 91

Chapter 4  Driver Installation    

79

Necessary prerequisites

The instructions in this manual assume that you understand elementa-
ry concepts of MS-DOS and the IBM Personal Computer. Before you
attempt to install any driver from the Supporting CD-ROM, you
should:

• Know how to copy files from a CD-ROM to a directory on the hard

disk

• Understand the MS-DOS directory structure

If you are uncertain about any of these concepts, please refer to the
DOS or OS/2 user reference guides for more information before you
proceed with the installation.

Before you begin

Make sure you know the version of the application for which you are
installing drivers. The Supporting CD-ROM contain drivers for several
versions of certain applications. For your driver to operate properly,
you must install the driver for your version of the application program.

Summary of Contents for PCM-4896

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands