4-6
Chapter 4: BIOS setup
SATA Mode Selection [AHCI]
Allows you to set the working mode of the SATA controller. Configuration options:
[AHCI]
4.3.3
PCH-FW Configuration
Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
This item allows you to enable or disable Me FW Image Re-Flash function.
Configuration options: [Disabled] [Enabled]
4.3.4
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating
systems (OS).
[Disabled]
USB devices are only available when running BIOS Setup.
[Auto]
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
4.3.5
Hardware Monitor
CPU Smart Fan Control [Disabled]
Allows you to enable or disable CPU Smart Fan Function. Configuration options:
[Enabled] [Disabled]
4.3.6
SIO Configuration
[*Active*] Serial Port 2
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
The following item appears only when you set
Use this device
to [Enabled].
