2-2
Chapter 2: Basic installation
2.1 Preparation
Before you proceed, make sure that you have all the components you plan to
install in the system.
Basic components
1. DDR4 2133/1867 MHz Non-ECC, Un-buffered SO-DIMM Memory
Module (DIMM)
2. Hard disk drive
Tool
Phillips screw driver
•
Use a grounded wrist strap or touch a safely grounded object or a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
2.2
Before you proceed
Take note of the following precautions before you install components into the
system.
2.3
Installing your NANO-002
Installing your NANO-002
1. Loosen the screws on the bottom
cover of NANO-002 with a
screwdriver.
