Aaeon MB-562, Manual, Page: 62 / 108

5 4 MB-562 User's Manual
<case3> Installing the Configuration Utility
(SETUPSA)
To install the configuration utility (SETUPSA) for only DOS MODE of
Win95:
1. Insert Disk [SA31INST] into your floppy disk drive.
2. Launch the MS-DOS prompt.
3. At the C:\DOS prompt, type
A:
then press Enter.
If your floppy disk is the B, type B: instead of A:, then press Enter.
5. Follow the on-screen instructions to complete the installation.
Note:
If you go to DOS-MODE from Win95, press “Start” button, select
“Shut Down...”, and select “Restart the computer in MS-DOS mode?”.
Then you can run the configuration utility (SETUPSA).