Chapter 2 Installation 23
LCD signal select (JP8)
You can select the LCD shift clock mode by setting JP8. The following
charts show the available options.
LCD signal select (JP8)
SHF CLK from C&T65550*
ASHF CLK (inverted SHF CLK)
* Default
Ethernet active/link signal LED
(JP9)(JP10)
The mainboard can connect two LED indicators to show the status of
the communication link and traffic. The functions are showed as
follows:
Ethernet active signal LED (JP9)
A flashing LED indicates that the MB-562 is transmitting or receiving
data.
Ethernet link signal LED (JP10)
A continuously lit LED indicates good linkage between the MB-562
and its supporting hub.
1 2 3
1 2 3
Summary of Contents for MB-562
Page 1: ...MB 562 All in One LPX Pentium MMX Mainboard...
Page 16: ...8 MB 562 User s Manual...
Page 80: ...7 2 MB 562 User s Manual...
Page 108: ...100 MB 562 User s Manual...
