Aaeon IMBM-H110A, Manual

Page: 29 / 52

2-21
Chapter 2: Motherboard information
5. System panel connector (10-pin F_PANEL1)
This connector supports several chassis-mounted functions.
• System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The HDD LED lights up or flashes when data is
read from or written to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
PIN 1
PWR BTN
P_LED+ P_LED- F_PWRBTN# GND
HDD_LED-
GND
RSTCON#_PANEL
(NC)
F_PANEL1
+PWR LED
+HDD_LED RESET
IMBM-H110A
IMBM-H110A Front panel connector