Aaeon APC-8122 Series, User Manual, Page: 49 / 54

R o b u s t P a n e l P C A P C - 8 1 2 2
Chapter 3 BIOS Installation 3-6
3.8 PnP/PCI configuration
This sample screen contains the manufacturer’s default
values for the APC-8122.
3.9 PC Health Status
This sample screen contains the manufacturer’s default
values for the APC-8122.
3.10 Frequency/Voltage control
This sample screen contains the manufacturer’s default
values for the APC-8122.
3.11 Load (CRT+LCD) Defaults or Load (LCD) Defaults
When you press <Enter> on this item you get a confirmation
dialog box with a message similar to:
Load (CRT+LCD) Defaults? or
Load (LCD) Defaults?
Pressing one item loads the CRT+LCD default or LCD
default setting, which allows the VGA displaying events on
CRT and LCD simultaneously or on LCD only.
3.12 Set Supervisor/User Password
You can set either SUPERVISOR or USER PASSWORD, or
both of them. The difference between the two is that the
supervisor password allows unrestricted access to enter and
change the options of the setup menus, while the user
password only allows entry to the program, but not modify
options.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup
screen, select System or Setup: