The remote control is an input device of the camera and is primarily used
for customer settings and password input. This is an infrared type
wireless remote controller.The maximum remote distance is 9 meters.
There are fifteen buttons on the remote control.
Select Item(UP)/Increase value
Display Menus /Exit
Make Selection/Enter
Change Value (Left)
Change Value (Right)
Select Item(Down)/Decrease
A) Press the punctuation “
” to turn on laser direction pointer in the night.
Please note: the Laser could be harmful to eyes if pointed at other humans.
CAUTION: If you are not using the camera for an extended period of
time, it is highly recommended that you remove the batteries from
the camera to avoid possible acid leak that may damage the camera
which would void the warranty.
QUICK START
2.1) Load Batteries
To supply power for the camera, Eight AA size batteries are needed,
Voltage of each battery should be
1.5V.
Open the bottom cover by pulling down the lock hole. Confirm that the
power switch is at the OFF position, pull out the battery depot. Load
the fully charged batteries into the depot according the polarities sign
shown below. Push back the depot to the battery chamber. The following