background image

W

ARNING!

P

RODUCT DESCRIPTION

A

DAPTATION GUIDE

Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions 
may result in property damage, serious bodily injury, and/or death. AA Products Inc. is not responsible for any property 
damage, personal injury, or death occurred while using any AA-Racks products. Retain these instructions for future 
reference.

Any modification or unintended use of this product voids any warranty and could create a hazardous condition.
Loads must be secure according to local height and deification regulations and or laws.

Secured loads and connections must be re-checked periodically for tightness.

In order to prevent installation problems, any consultation or use of certified installer or installation service company 

is recommended.

The AA Steel Van Shelving Storage System is designed for tools and equipment storage on Vans or trucks. 
This product is constructed with thick metal gauge and its fully hemmed sides are designed for extra strength and 
durability. The shelves heights are adjustable for different storage needs. 
The product comes with completed hardware including mounting brackets and connectors brackets. It’ s designed for 
easy installation.
Grey Powder coat Finished Paint is All-Season weather resistant and scratch resistant, built to work and last.

We offer Four different sizes of Shelf Units for different customers’ need:
   SH-4303: 

32” W x 13” D x 43” H                                     

SH-4603 / SH-4603-GAP: 

32” W x 13” D x 46” H

   SH-4604 / SH-4605-GAP: 

42” W x 13” D x 46” H

        SH-4605 / SH-4605-GAP: 

52” W x 13” D x 46” H

           

Metris

NV200

Promaster City

Promaster

Sprinter

Transit Connect 2014+

Chevy City Express

Transit

Transit

GM

NV

NV

COMPACT CARGO VANS

LOW ROOF

MID/HIGH ROOF

VAN TYPES

FIT TIPS 

SH-4303

( 32” W  * 43” H ) 

SH-4603 /

SH-4603-GAP

( 32” W  * 46” H ) 

SH-4604 /

SH-4604-GAP

( 42” W  * 46” H ) 

SH-4605 /

SH-4605-GAP

( 52” W  * 46” H ) 

     It is not recommended 
to install the Shelf Unit in 
the wheel well position.

     It is normal installation.

     Installation is not 
recommended.

I

NSTRUCTION MANUAL

AAPRODUCTS INC.

F

or Technical Support Call:1-888-806- 3972 / 626-332-4245

Summary of Contents for SH-4603-GAP









Reviews: