S
TEP 3
Use Bolt M8*15(J) & Flange Nut M8(L) connect a Bracket(F) with Head Connectors(G), mark the mounting location on vehicle wall
as need for installing Brackets and Head Connectors. Then mark the other side the Bracket to the appropriate position on the Self
Unit, note that Do not set the marking point on the last hole of Bracket( If there is no hole in the Mounting location, can be drilling
as need), install Bracket to the Shelf Unit with Bolt M8*15(J) & Flange Nut M8(L). DO NOT tighten nuts on the Side Plate. The
Brackets can be moved as your need.
S
TEP 4
Secure Head Connectors(G) to vehicle using Self Drilling Screw M6(V).
Then mark the second spot on the end of the Bracket to the appropriate position on the Self Unit( If there is no hole in the
Mounting location, drill second hole on the Side Plate after desired location is reached ), use Bolt M8*15(J) & Flange Nut M8 (L) to
connect.
Check all mounting hardware to insure tightness, you are now done.
G
L
J
M
ake as need
FIG 9
FIG 10
V
J
J
L
L
The bolt and nut you will
use for:
L
J
TIP: Self Drilling Screws(S)
are provided for
convenience. If available,
Plus-nut are preferred.
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
