2.1 Specifications
Model: EMCXX---YY (XX: Output Voltage, YY: Output Amps)
Efficiency:
≥
88%
Input voltage: 110V AC (220V AC available as special order)
Input voltage range: AC 95 ~ 130V / AC 195 ~ 242V
Frequency: 40 ~ 60Hz
Communication: CAN and 12V Digital Input
Vibration: SAEJ1378
Water resistance: IP31
Power factor:
≥
0.75
2.1 Operating Environment
Altitude:
≤
2000 Meters
Temperature: ---30
°
C ~ 55
°
C
Installation Stress:
≤
level 5
Humidity: 5% ~ 70% RH @ Non Condensing, keep away from exposure to moisture
Storage environment: ---30
°
C ~ 60
°
C @ Keep away from combustible materials
3. Charging Status and Alarm Status Indication
3.1 Alarm Indication
Reverse polarity or low voltage: Red light blinking, 20% light on
Charger over heating: Red light blinking, 40% light on
Ambient temperature too high: Red light blinking, 60% light on
Charging time out: Red light blinking, 80% light on
Over Voltage Protection: Red light blinking, 100% lights on
BMS alarm/charging interruptions All LED’s blinking
3.2 Charging Status Indication
Shutdown status: Six lights blinking
Charging stage: Percent light indicating pack voltage vs. max charging
--- voltage
Battery presence not detected: Red light blinking, 20% light on
Charging complete: All green lights on
4. Functions
4.1 Output short circuit protection.
4.2 Over---temperature protection:
Temperature less than 83
°
C @ Full charging power
Temperature is 85
°
C to 95
°
C @ Power reduced to 50%
Temperature is greater than 95
°
C @ No output
