EmbeddedBlue 500
39
Copyright ©2003 A7 Engineering, Inc.
Step 3: Establish a Connection
In this step we will establish a connection from the Board of Education to the iPAQ.
1.
Turn on the
iPAQ
.
2.
Tap the
Bluetooth icon
and select
Bluetooth Manager
.
This will display the Bluetooth Manager dialog.
3.
Tap the
Active Connections
tab.
4.
Apply
power
to the
Board of Education board
.
Power can be applied by attaching a 9 Volt battery, or the AC-Adapter provided by
Parallax.
5.
Using the Basic Stamp Editor, on the
Run
menu, click
Run
.
Depending on your current iPAQ Bluetooth configuration, the Authorization
Requested Dialog may appear (Figure 9). If this dialog appears, tap Accept to accept
the connection. The Connection Status LED (Figure 1) on the eb500 module will turn
on when a connection is established. On the iPAQ the connection will be shown in
the Incoming Connections section of the Active Connections tab on the Bluetooth
Active Connections dialog.
Figure 9: iPAQ Bluetooth Authorization Request Dialog
