— 3 —
Locating the RF-Mouse Receiver
Your RF-Mouse has limitations on the range or distance from the receiver. To make sure that your
mouse sends and receives properly, refer to the following:
1.
For optimal performance, place the receiver at least 8 inches (20 centimeters) away from
other electrical devices, such as the computer, the monitor, or external storage drives.
2.
The RF-Mouse should be no farther than 3.3 feet (1.0 meter) from the mouse receiver.
This will ensure optimal communication between the mouse and receiver.
3.
If you are working on a metallic surface, try using a mouse pad and turning the receiver face
down for better reception.
4.
Switch frequency channels to prevent interference from other RF pointing devices. (See the
following section for more information.)
Selecting the Frequency Channel
The RF-Mouse operates on two frequency channels. To prevent interference when
using two RF Mice in close proximity a different frequency channel should be used
for each mouse. Refer to the following to change the frequency channel for your
mouse:
1.
Set the frequency channel on the receiver to
1
or
2.
2.
Remove the battery cover from the mouse (see the following
Inserting the
Batteries
section).
3.
Set the frequency channel on the mouse to
1
or
2.
(The frequency channel for
mouse and receiver must be the same.)
Channel
