3
Power On Indicator
Green LED light
DC Jack
Charge Output Jack
Audio Cord
TRANSMITTER
1) Connect the supplied AC/DC power adapter to an
electrical power source or wall outlet.
2) Plug the AC/DC power Adapter into the DC jack
located on the rear of the transmitter.
3) Locate the audio cord connected at the rear of the
transmitter. The 3.5 mm plug provided can be used to
any audio source. For connection to RCA type phone
jacks located on the back of TV, VCD, DVD, use the
"Y" adapter that is included.
4) Insert the mini plug on the audio cord into the jack
on the adapter to convert the connector for this
application. Then insert the red and white RCA plug
ends into the equipment jacks marked "Audio Out " to
make the audio source connection.
AUTO POWER OFF FUNCTION
The transmitter will have its power automatically
cut off few minutes upon turning off the equipments.
INSTALLATION OF HEADPHONE RECEIVER
1) Open the battery compartment cover on the left
headphone
2) Insert two AAA size Ni-MH rechargeable batteries with
both battery’s po) side located on same(top)
Position.
3) Replace the cover and your headphone is ready to use.
“Y”
adapter
“1/4”
adapter
