![background image](http://html.mh-extra.com/html/a2z-ozone/aquatic-2/aquatic-2_operating-manual_448121003.webp)
2
Important Safety Information
Read and follow this owner’s manual carefully for
important installation, operation and safety information.
Always follow basic safety precautions, including but not limited to the
following:
• All electrical connections should be made by a qualified electrician.
• Follow all applicable electrical codes.
• Be sure the electrical power is shut OFF at the main circuit breaker
before installing the ozone generator.
• If the ozone generator electrical connection is to be attached to
spa controls, be sure the spa controls are protected by a Ground
Fault Circuit Interrupter (GFCI). If the Aquatic 2 is connected to an
independent electrical supply, have a qualified electrician install a
GFCI between the ozone generator and the electrical supply.
• Do not bury the cord.
WARNING – To reduce the risk of electrical shock, replace damaged
cord immediately.
• Per UL spa requirements, the Aquatic 2 must be mounted indoors or
under a cover sheltered from the elements (rain, sun, sprinklers).
• Never attempt servicing when you are wet.
• To reduce the risk of injury, mount the unit where it is inaccessible
to children.
• Plastic ozone supply tubing is available with the Aquatic 2. Never
replace this tubing with metal tubing.
• Do not operate the Aquatic 2 unless sufficient air flow is accessible
to the unit.
• The use of ozone test strips or dissolved ozone monitor is required.
•
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Caution: In case of accidental leakage, install the ozone generator in a
well-ventilated area.