background image

5

Warnings

• Do not use the power source other than 

AC 220V, 50Hz.

• All connecting cables shall be connected 

to and disconnected from the interfaces 
only when power is disconnected.

• Do not install on an unstable place, as 

it may fall down and cause damage, or 
even fire.

• Do not expose the Professional Monitor 

to:

1. Direct light, and humid, very hot, cold 
or dusty environment.
2. Environment where explosive and 
inflammable substances are stored or 
used.
3. Environment filled with combustible or 
corrosive gases.
4. Bath rooms and kitchens, etc.

• Do not use any damaged or unsuitable 

socket and ensure reliable contact 
between the plug and socket.

• Ensure the power plug and socket is not 

affected by dust and metal impurities.

• Do not damage the power cord:

1. Do not refit the power cord.
2. Do not place any heavy object on the 
power cord.
3. Keep the power cord away from the 
heat source.
4. Do not pull the power cord when 
removing the power plug.

• Do not connect too many plugs in parallel 

to the same socket, or excessive power 

as it may cause fire.

• Keep the device away from open fire (e.g. 

a lit candle), as it may cause electric 
shock or fire.

• Keep the product away from water drops 

or splashes. Do not put any container 
filled with water on the product, or there 
could be a risk of fire or electric shock.

• Do not insert any sharp or metal object or 

pour any liquid into the signal connector 
or ventilation holes, or there could be a 
risk of short circuit, product damage or 
electric shock.

• The ventilation holes in the housing are 

designed to protect the product against 
overheating and ensure the inside 
components are durable and reliable. Be 
careful not to block the holes.

• Do not touch the plug with a wet hand, or 

it may cause electric shock.

• Do not use the product in case of 

rainstorm and especially thunder and 
lightning; please disconnect the power 
supply and antenna plug timely to 
prevent from thunderstrike.

• For your safety, you are not allowed to 

disassemble the product in any manner, 
or it may cause electric shock or fire. 
Please contact professional technicians 
for repair.

Summary of Contents for 75C1U

























Reviews: