10
English
5.3 Output settings
Modulation/
Band
Start the output setup by selecting which band
you want to use. You can select VHF-7, VHF-
8 and UHF. VHF-7 and VHF-8 corresponds to
7 and 8 MHz bandwidth. After selection press
[Set].
Frequency
For each of the 3 possible output channels,
set the desired output channel or frequency.
Channel Indicator Name
You can set the “Channel Indicator name” by
your personal preference. The Channel
Indicator will enable you to detect on a TV-
screen which programs that are transmitted
from the MyM-3T. Press
[Set]
after each
entering.
National/
Subtitle/
Type
Set type of subtitling to Normal or for Hearing
Impaired or None
National settings enables language and
regional settings depending of the region the
MyM-3 S is installed in, or which parameters
you want to use for the output.
Language
Select subtitling language. Depends of
received languages in the satellite signal.
Priority
Set DVB or Teletext subtitling as default
selection.
.
5 Menus and settings (continued)
Summary of Contents for MyM-3TMicro Master
Page 1: ...1 1 MyM 3TMicro Master Installation Guide design for TV English...
Page 18: ...18 Notes...
Page 19: ...19 Notes...
