Digital Video Recorder User Manual
Guest:
The
Guest
user has no permission of Two-way Audio in Remote Configuration and
only has the local/remote playback in the Camera Configuration by default.
User’s MAC Address:
The MAC address of the remote PC which logs onto the DVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the
DVR.
Step 4 Click the
OK
button to save the settings and go back to the
User Management
interface.
The added new user will be displayed on the list, as shown in Figure 15-10.
Figure 15-10 Added User Listed in User Management Interface
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click
to enter the
Permission Settings
interface,
as shown in Figure 15-11.
Figure 15-11 User Permission Settings Interface
2) Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
Local Log Search: Searching and viewing logs and system information of device.
189
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]