06/2021
Page 23
Installation and Operating Instructions
UPS Edition One 6kVA, 10kVA
4.3.10 Parallel ID setting
Parallel ID setting
(
NOTE:
Inside the broken-line
is the flashing part)
If you are in the battery self-test setting, press
DOWN or press UP if you are in the parallel
quantity setting. This will take you to the
parallel ID setting. You can set this as follows:
■
Press ENTER/ON to enter the value setting status.
Press UP & DOWN to set the different parallel IDs and press ENTER/ON to confirm.
The range for the parallel ID is 1~4.
■
Pressing the UP & DOWN buttons takes you to the battery self-test setting or parallel
quantity setting.
NOTE:
No parallel cable can be connected when setting the parallel parameters.
4.3.11 Parallel quantity setting
Parallel quantity setting
(
NOTE:
Inside the broken-line
is the flashing part)
Press the DOWN key when setting the parallel ID or the UP key when setting the paral-
lel redundancy quantity to move to the parallel quantity setting. You can set the parallel
quantity as follows:
■
Press ENTER/ON to enter the value setting status.
Press UP & DOWN to set the parallel quantity and press ENTER/ON to confirm.
The range for the parallel quantity is 2~4.
■
Use the UP & DOWN keys to move to the parallel ID setting or the parallel redundancy
quantity setting.
