Chapter 3 Award BIOS Setup
ATC6240V Mainboard
30
If you would like to use Software Power-off Control function, you should select
“Yes” in PM Control by APM.
PM Control by APM
When enabled, an Advanced Power Management mechanism
will be activated to enhance the Max. Power Saving Mode and stop the CPU internal
clock. If the Max. Power Saving is not enabled, this will be shown as Yes.
Video off After
When enabled, this feature allows the VGA adapter to operate in a
power saving mode.
N/A
Monitor will remain on during power saving modes.
Suspend
Monitor is blanked when the system enters the Suspend mode.
Doze
Monitor is blanked when the system enters any power saving mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC
+ Blank
This selection will cause the system to turn off the vertical and
horizontal sync. ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support Initial of “Display Power Management Signaling”.
Soft-Off by PWR-BTTN
Instant-off :
When push the power button, the system power
will be off immediately.
Delay 4 sec :
when push the power button, it will enter
suspend mode. We need to push the power button and hold it for 4 seconds to turn off
the power.
The Following 3 modes are Green PC power saving functions which are only user
configurable when ‘User Define’ power management has been selected.
2
2
2
2
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
2
2
2
2
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
2
2
2
2
HDD Power Down
When enabled and after the set time of system inactivity, the
hard disk drive will be powered down while all other devices remain active.
Modem Ring Resume
Enabled: when system is in suspend mode, it can be waked up
by modem. Disabled: it cannot be waked up by modem.
