A-Trend ATC-6400, Manual

Page: 39 / 44

AMIBIOS HIFLEX SETUP UTILITY – HARDWARE MONITOR SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
CPU Frequency Selection 100MHz Available Options:
 100 Mhz
105 Mhz
112 Mhz
124 Mhz/3
124 Mhz/4
133 Mhz/3
133 Mhz/4
140 Mhz
150 Mhz
ESC:Exit ↑↓ :Sel
PgUp/PgDn:Modify
F2/F3:Color
CPU Ratio Selection 3.5x
VCC3 Voltage Setting 3.4V
Current VID
VID Setting
= ≡ System Hardware Monitor ≡ =
Current CPU Temperature
Current System Temperature
Current CPU Fan Speed
Current Chassis Fan Speed
Current Power Fan Speed
Vcore
Vtt
Vio
+5.000V
+12.000V
-12.000V
-5.000V
2.00V
2.00V
20
o
C/68
o
F
26 o C/78 o F
0 PPM
0 PPM
0 PPM
1.920V
1.472V
3.392V
5.085V
11.741V
-11.484V
-4.763V
CPU Frequency
Selection Use this item to set CPU base clock frequency which includes 66,
75, 83, 100, 105, 112, 124, 133, 140, 150MHz. The default setting
is 66MHz.
After you change the CPU Clock Frequency and the system can
not start, please do the following procedures:
1. Turn the system off firstly.
2. Turn on the system and keep pressing “ F10 ” key at boot.
3. Select the proper frequency in this item.
4. Shut the system down again.
5. Turn on the system.
CPU Ratio
Selection Use this item to set CPU ratio which includes 3.0x, 3.5x, 4.0x, 4.5x,
5.0x, 5.5x, 6.0x, 6.5x, 7.0x, 7.5x, 8.0x. The default setting is 3.5x.
VCC3 Voltage
Setting The selection of I/O voltage. Recommend users not to change the
default setting.
Note: If you change your CPU from 66MHz to 100MHz (or from 100MHz to
66MHz), there is a message showed on the screen at boot such as “ The CPU has been
changed. Press F1 to run SETUP. Press F2 to load default values and continue. ”
39