2-5 IDE DRIVER INSTALLATION
The IDE driver installation procedure is the following :
Setup for Windows 95 :
1. Start Windows 95
2. Select “START”, “RUN”.
3. Install INF.EXE before you install IDE driver: Type “D or E:\ INF.EXE”.
4. Put the CD into your CD-ROM drive:
Type “D or E:\IDE\WIN95\SETUP.EXE”.
5. Restart the computer, then follow the instructions on your
screen to install the new IDE driver we offer in the CD.
6. Exit Windows 95, turn the power off; then turn the power on.
(The other platforms please refer to readme file.)
2-6 HARDWARE DOCTOR INSTALLATION
Setup for Win95/98
1. Start Windows95/98.
2. Insert All-In-One CD into your CD-ROM drive.
3. Choose “Install Hmonitor (Option)” in the installation main menu.
4. Press “OK” to begin setup.
(
*
In Win95, it may show a screen to prompt user to restart the computer,
press “Yes” to restart the computer, then repeat the step 1-4.)
5. Click the button to install Hardware Doctor software.
6. Press “OK” to complete the setup program.
Setup for WinNT
1. Start WinNT.
2. Insert All-In-One CD into your CD-ROM drive.
3. Choose “Install Hmonitor (Option)” in the installation main menu.
4. Press “Next” to start the installation.
5. Press “Next”.
6. Press “Next”.
7. Choose “Finish” to complete the installation.
8. Select “Start”, “Shut down”, “Resart the computer”.
Note: After finishing Hardware Doctor installation, in WinNT you must restart your
computer, but in Win95/98 you don’t have to.
17
