6253M Mainboard Chapter 3 Award BIOS Setup
PNP/PCI CONFIGURATION
This screen configures the PCI Bus slots.
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
PNP OS Installed
: No
Resources Controlled by
: Auto
Reset Configuration Data
: Disabled
Esc: Quit
áâß
:Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values
(Shift) F2: Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
PNP OS Installed
This item allows you to determine PnP OS or not. Choices are Yes
or No.
Resource Controlled by
The Award Plug and Play BIOS has the capability to
automatically configure all of the boot and Plug & Play compliant devices. However,
this capability means absolutely nothing unless you are using a Plug and Play OS such
as Windows 95. Choices are Auto and Manual. Only when “Manual” is chosen, will
the IRQs and DMA choises show up.
Reset Configuration Data
This item allows you to determine whether to reset the
configuration data or not.
IRQ3/4/5/7/9/1011/12/14/15, DMA0/1/3/5/6/7 Assign to
When “Resource Controlled
by” is “Manual”,these items allow you to determine the IRQ/DMA assigned to the
ISA bus and is not available to any PCI slot. Choices are Legacy ISA and PCI/ISA
PnP.
Used MEM base addr
This item allows you to determine which basic address will not
be occupied by PCI card and leave these address for some special ISA card used only.
Choices are N/A, C800, CC00, D000, D400, D800, DC00. When “Used MEM base
addr.” is set, The default item “Used MEM Length” will show “8K”.
