A+ Trainer 160B, Manual

Page: 3 / 4

2.
Secondly, open the receiver.Press this button for a short
time.And you will hear a beep.
3.
Thirdly,press this button to pair,and you will hear a
beep again.
4.
Vibration Function:Firstly,you press this button
,and you can see the is flashing on the
screen.Then press this button you will hear the beep and
the receiver is vibrating. Every time you launch vibration
channel you must press . And you can press these button
to increase or decrease the intensity
of vibration.
5.
The operation of shock is the same as above.
6.
Beep function:you can press this button directly.Or you
can press this button and then press this button
7.
This system can be used for 1 or 2 receivers.
8.
Automatic Mode:press this button ,and then press
this button .And you will hear the beep.You can adjust the
sensitivity by pressing these button
.Every time you adjust the