14
2.3
ANTENNA
Connect the FM antenna to the FM ANTENNA connector.
Later, when unit is operating move the antenna to find best reception.
2.4
LOCAL AREA NETWORK
A network connection is required for configuring Anthem Room
Correction, using the Play-Fi App, or using IP control. To use a wired
connection, simply connect your router using CAT5 cable.
Wireless connection is explained in the setup section – note that if the AVM/
MRX is mounted in a metal rack, wired network connection is recommended
instead especially if the wireless router is in a different room or if anything else
can impact signal strength. If using wireless connection, add the two network
antennas to the rear panel.
If a firewall is used for security, ensure that the AVM/MRX is permitted to join the network.
2.5
12 VOLT TRIGGER
If another system component has a trigger input it can be activated by
the AVM/MRX. Connect the AVM/MRX’s trigger output using a cable
with 3.5mm mini plugs. The AVM/MRX provides flexible trigger options.
Through the setup menu, you can specify the conditions for enabling
triggers.
2.6
INFRA RED
An external IR receiver allows the remote control to be used from another
location in your home – connect the AVM/MRX from an external IR hub to the
IR IN jack. Most standard IR repeater kits can be used but to avoid problems
test compatibility before installing permanently.
2.7
POWER
Connect the power cord to the AVM/MRX and the
power source.
AVM 60US
2015.10.26
PRINTING : WHITE
FILM NO.:150913-3
Summary of Contents for mrx 1120/720
