A.R.North America AR767, Operating Maintenance Installation

Page: 9 / 10

AR767 - Body
7
6
11 12
13
14
15
15
7
18
19 6
16
17
13
13
9 10
1
3 2 4
5
8
See Pump
See Unloader
See Motor
20
21
Pos. Code Description Qty.
1 2500040 Blue casing 1
2 2500340 Closing plug 1
3 2500310 Knob 1
4 2500050 Hook 1
5 2500240 Cover 1
6 1680880 Washer 2
7 2500320 Driven gear
Ø175
2
8 2500330 Detergent hose 1
9 2500100 Fixing plate 1
10 1260470 Screw TE
M8x10
4
11 2100300 Screw
5x16
1
12 2600100 Gland 1
13 2100300 Screw
5x16
7
14 2500020 Handle 1
15 2500130 Rubber feet 2
16 880280 Screw
TCEI M6x18
4
17 2180300 Washer
Øi6.2
4
18 2500120 Wheels axle 1
19 2509001 Detergent tank assembly 1
20 2500010 Body 1
21 42113 Complete detergent plug 1
5.6.3 Unscrew the adjustable head and fi t the rotary nozzle onto
the lance.
5.6.4 Turn the high pressure cleaner back on.
5.7 Recommended Cleaning Procedure
5.7.1 Dissolve dirt by applying detergent with the fan jet to the
dry surface.
On vertical surfaces, work from the bottom upwards. Leave
the detergent to act for 1 to 2 minutes, but do not allow to
dry out. Apply the high preesure jet, keeping the nozzle
at least 10 in. from the surface, working from the bottom
upwards. Avoid allowing the rinsing water to run on the
unwashed surfaces.
5.8 Storage
5.8.1 Switch off the cleaner.
5.8.2 Turn off the water supply tap.
5.8.3 After use, the detergent residues should be removed from
the tank.
5.8.4 Discharge residual pressure by pressing the trigger until no
more water comes out of the adjustable nozzle.
5.8.5 Engage the gun safety catch.
5.8.6 Remove the plug from the socket.
5.8.7 Operate the cleaner with non-corrosive/non-toxic antifreeze
before storing for the winter.
6 M
AINTENANCE
6.1 CAUTION! Before working on the cleaner, disconnect
the plug from the power supply
socket.
6.2 To ensure good performance,
check and clean the suction and
detergent fi lters after every 50
hours of operation.
6.3 Lont periods of disuse may lead to
the formation of lime scale deposits. Working through the
hole on the rear, or a 6 Allen key (6) for models with this
feature.
6.4 Clean the nozzle with the tool provided. Remove the lance
from the gun, remove any dirt from the nozzle hole and
rinse.
g ,
rinse.