A.R.North America AR767, Operating Maintenance Installation

Page: 6 / 10

3.1.10 Use the cleaner only with accessories and replacement
parts authorized by the manufacturer. The use of original
accessories and replacement parts will ensure safe, trouble-
free operation.
3.1.11 The cleaner must be used standing on a secure, stable
surface, positioned as shown.
3.2 Intended Use
3.2.1 The cleaner is intended only for the cleaning of vehicles,
machines, boats, buildings, etc., by the removal of stubborn
dirt using clean water and chemical detergents.
For domestic use only (single-phase motors only). Not for
professional use (for three-phase or industrial motors only),
and only for opration at temperatures above 32° F.
Compliant with EN 60335-2-79/A1 standard.
3.2.2 When using chemical detergents, only use biodegradable
types. We recommend HOBBY – FOAM detergent (#3206).
3.2.3 Only clean vehicle engines in areas in which suitable oil
traps are installed.
3.3 Safety Valve
3.3.1 The safety valve also functions as a pressure-limiting valve.
When the gun trigger is released, the safety valve opens and
the water recirculates through the pump inlet. Never try to
adjust this valve.
4. I
NSTALLATION
/A
SSEMBLY
4.1 Fit the lance into the gun by rotating and pushing until the
two parts are completely locked.
4.2 Connect the gun to the high-pressure hose.
.
AR767 - Motor
Pos. Code Description Qty.
1 1271950 Cable retainer 1
2 1260300 Fab 1
3 1260970 Seal ring 1
4 1260810 Screw
TCTC M4x10
1
5 2360420 Capacitor
80uF
1
6 1265080 Gasket 1
7 1272030 Switch 1
8 1261560 Screw
3.9x16
4
10 1260341 Switch box 1
11 1260400 Gasket 1
12 1269100 Earth clamp 1
13 1466890 Cable 1
14 1269090 Cable retainer 1
15 1260950 Bearing 1
16 1260961 Motor shield 1
17 44075 Electric motor 1
18 1340280 Clamp 1
19 480621 Screw
TE M5x25
4
20 1261570 Screw
3.9x9.5
4
21 1271660 Fan housing 1
8
6
10
11
15
1
14
16
2
3
4
12
13
7
5
18
21
20
19
17