T-M32 / T-M32 ASME Service Manual
Ver. 1.03
47
CONFIDENTIAL
12-1. Diagnosis using the remote controller
<Individual unit>
1. Press the "HOT" button and the "COLD" button simultaneously for
at least 5 seconds to enter “Diagnostic mode”.
2. Scroll up or down to the needed information (mode #) of the
T-M32 by pressing the “HOT” or “COLD” buttons.
(Fig.1 shows mode #5 being selected.)
When selecting information, please refer to the table on p.49 for
the proper mode #.
3. Press the “INFO” button to fix the mode #, and the information to
which the mode # correlates to will display on the remote
controller. (Fig.3)
4. When the “ON / OFF” button is pressed or 5 minutes have elapsed
without pressing any buttons, the display will return to normal.
“TIME”
Button
“HOT”
Button
“ON/OFF”
Button
“COLD”
Button
“INFO”
Button
“BUZZER”
Button
Fig.1
Fig.2
Mode #
Information
