A.O. Smith STE - 1000, Installation, User And Service Manual

Page: 80 / 112

Installation, User and Service Manual STE
80
3.8 Electrical
connections
3.8.1
3.8.2
4. Position de cover on the water heater. Close the cover with the zipper to the rest of
the jacket. Place the Velcro-strip beneath the elelements.
Note
In this jacket are no holes for the connections. Fit the jacket over the tank and tap, with a
soft hammer, on the edges of the necessary connections, so that they become visible in
the jacket. Cut the holes in the jacket with a knife, so that the connections become visible.
Introduction
This section covers the following topics:
•
Preparation ;
•
Connecting the mains power ;
Preparation
Warning
The installation should be carried out by a competent person in compliance with the
general and locally applicable regulations
(1.3 "Regulations") .
Note
Consult the table for the connections and consult the electrical diagram for the electrical
component connections.