ENG 10
Pre-Installation Preparations
•
Choose the location where the water purifier will be installed
•
Confirm the availability of the various tools required
for installation
•
Confirm that you have all the connectors required for installation
•
Make sure to turn off the water supply and electricity before
commencing installation
Functions of Accessories
•
Storage Tank:
Used to store water filtered by the water purifier.
•
High Pressure Pump:
Boosts pressure to create a stable environment
for the RO membrane.
•
Combine Solenoid Valve:
Control the waste water flow and
automatically flush the RO membrane.
•
Low Pressure Switch:
Prevents pump idling. When the inlet water
pressure is less than 1 Bars or when the inlet water stops,
the low-voltage switch automatically shuts off the power source
so the machine comes to a halt.
•
High Pressure Switch:
Prevents pump from overdrive. When the pressure
tank is full or has reached the set pressure level, power supply is
automatically cut off to stop the operation of the machine.
•
Inlet Water Solenoid Valve:
Connects or cuts off incoming water.
Operating pressure range is less than ≤0.6MPa.
•
Check Valve:
Also known as a one-way valve, controls the direction
of water flow.
•
•
Transformer:
Converts 230V AC to 24V DC (the machine's safe
operating voltage).
•
Computer Control Box:
Control the working status of water purifier.
•
Leakage Alarm:
Detect malfunction of water leakage timely to protect
user's safety and avoid the loss of user's property.
Water Purifier Features
•
Side Stream Membrane:
The Side Stream R.O. membrane increases
the recovery rate to around 50%, compared to 25% for the regular
residential R.O. membrane, and waste water volume is reduced by 56%.
•
Low Noise:
This machine’s imported parts offer low noise,
few vibrations, long service life, operational quality and reliability;
•
Automatic Control System:
The system controls the whole water
production process, such as stopping automatically when there is no
inlet water or when the tank is full;
•
Auto Flush Function:
The system can automatically control the water
auto flush process for the RO membrane to ensure more reliable
and safe operation.
Installation Methods
Our company recommends that your water purifier is installed by trained professionals as the installation process is somewhat complex and requires the
use of various tools. However, if you decide to install the purifier yourself, please refer to the following steps and diagrams:
Adjustable Spanner
Drill
6.2 mm Drilling Bit
Hole Saw
φ
14 mm
Phillips and Flathead Screwdrivers
Scissors
14 - 16 mm Wrench
19 - 21 mm Wrench
Needle Nose Pliers
1
1
1 (Waste water hole)
1 (High-speed steel or marble hole saw)
1 of each
1 pair
1
1
1
•
Stock up on top of each other more than 8 pieces.
•
Before lifting the packages be sure that fixing tapes below the package
are intact.
•
Lift the packages holding from bottom.
•
Persons, who are vulnarable to heavy lifting shoud not carry the packages
to prevent any health issues.
Transportation
Please take into consideration the following points while transporting the device.
Summary of Contents for LOTUS-75TC
