background image

 

16 

 

 
 
 
 
 
 
 

PM2.5 Monitor 

 

The PM2.5 sensor can measure the volume of PM2.5 in nearby area and display the actual measurement on the 
real-time  monitor.  The  air  quality  will  also  be  analyzed  and  categorized  into  4  grades,  which  are  “Excellent”, 
“Good”, “Moderate” and “Bad”. 

Gas Monitor  

The Gas sensor can detect the existence of gas pollutants in nearby area, the air quality toward gas pollutants 
will also be analyzed and categorized into 4 grades, which are “Excellent”, “Good”, “Moderate” and “Bad”. 

Air Cleanliness Halo  

The  PM2.5  and  Gas  Monitor  also  equipped  with  Air 
Cleanliness  Halo,  the  Halo  will  change  in  color  to  illustrate 4 
different grading of air cleanliness as below: 

 

Excel      ------------------------------  Blue 

 

Good     ------------------------------  Yellow 

 

Mod      ------------------------------  Orange 

 

Bad       ------------------------------  Red 

 
 
 
 
 
 
 
 

 
Air Volume Monitor

 

The Air Volume Monitor shows the current output flow rate and the flow rate of the selected mode. 

 
 
 
 
 
 
 
 

Output flow rate in different mode(Upper & lower fan turn on) 

 

SLEEP

------------------------------------ 

260m

3

/h    

 

LOW -------------------------------------  400m

3

/h    

 

MID-------------------------------------- 

660m

3

/h    

 

HIGH------------------------------------- 

900m

3

/h    

 

QUICK

------------------------------------  1200m

3

/h  

Note: 

 

The sensors will initialize after the first time of the unit is being connected to the power supply; or being 
turned on again after the unit is not in used for a period of time. The process of initialization will take 2-5 
minutes  to  complete.  After  this  process  is  completed,  the  PM2.5  and  Gas  indicator  will  light  up 
automatically. 

 

As default, the SMART mode will active when the unit is being turn on. 

Note

 

 

The gas sensor is not designed to detect a specific type of gas pollutant. When user measures a specific 
type of gas pollutant such as formaldehyde, the result of measurement may differ from the unit’s sensor.  
If strong odor is smelled, Quick mode is suggested to activate for fast purification.  

 

The  measured  value  of  PM2.5  from  the  unit  is  for  reference  only;  the  precision  of  the  sensor  can  be 
interfered  by  other  appliances,  such  as  humidifier.  When  the  fan  switches  between  high  to  low  wind 
speed, the reading of PM2.5 will fluctuate temporarily. 

Note

 

 

SMART  mode  will  change  its  setting  according  to  the  air  quality  and  brightness  of  the  surrounding 
environment. Therefore, output flow rate will change time by time. 

 

The output flow rate shown on the Air Volume Monitor will fluctuate according to the change of selected 
mode. 

 

To create a peaceful environment for sleeping, some indicators and the Air Volume Monitor will light off 
when the SLEEP mode is selected. 

Summary of Contents for KJ1200F-B01-HK

















Reviews: