Directions For Use
13
CAUTION:
•
Before using the water heater, ensure it is filled with water and that the power plug has been
connected properly.
1. Initial power up
During the initial power up, all screen
indicators on the control panel will light
up momentarily (2 seconds). After this, the
water heater will enter standby mode.
2. Power on/off
Press the power button to turn the water heater on.
The system is currently operating on default settings.
The actual temperature and set temperatures are
displayed and if the actual water temperature in
the tank is lower than the preset temperature,
heating begins and the heating indicator lights up.
The default settings are:
•
Power: 4000W
•
Time: 12:00
•
Thermostat: 70
°C
If the water heater encounters a power outage,
all settings will revert to default settings.
3. Setting the temperature
The water heater can simultaneously display both the actual temperature and set temperature. The
actual temperature measures the average internal tank water temperature and the preset
temperature is the user defined thermostat setting.
Press the “
” the “
” buttons to adjust the thermostat. The set temperature will blink while being
adjusted. Holding down the adjustment buttons will cause the temperature to increase or decrease
continually. The thermostat has a range of 35
°
C to 75
°
C
.
IMM indicator
Heating indicator
Maintenance indicator
Power
After initial power up
