ENG 16
Filter Replacement Method
• Before replacing filters, pull the power cord out and close the water
supply valve.
• Remove drip tray.
• Push down the lower cover and pull it to the front and separate it.
• After replacing filters, reassemble parts in reverse order.
- After replacing filters, check if there is water leakage at connecting
parts.
- Refer to Water filtration process(p.10,11) and keep the filteration order.
• Open the water supply valve and plug the power cord.
Filter Replacement
• Before replacing filters, pull the power cord out and close the water
supply valve.
• When using the unit for the first time or replacing filter, do water flushing
process to each filter for more than 10 mins, until white, black or bubble
water doesn't come out from the filter. (Water Flushing : a process
of cleaning inside of the filter)
• After replacing carbon filter, black carbon dust may remain
on the bottom of the unit. (The dust is spilled from carbon filter which
makes water taste fine and harmless.)
Maintenance and Repair
Fitting
Fitting Seperator
Water Supply
Valve